13.1 – Choose your path

We addressed a very crucial concept in the previous chapter. We looked at how one can determine equity based on 3 different models. Each of these three models on its own merit imposes some sort of position sizing discipline, but clearly that’s not enough. We still need a standalone method to position size. Given this, we will move forward to discuss some of Van Tharp’s techniques on position sizing.

I’d like to talk about three core position sizing techniques at this point, they are –

  1. Unit per fixed amount
  2. Percentage margin
  3. Percentage of volatility

Do note, these models are asset independent and time frame independent. What do I mean by this? This means that you can apply these position sizing techniques to any asset you want. It could be stocks, stock futures, commodity futures, or currency futures. Further you can apply them across any time frame – intraday, few trading session, or even trades extending for over few months.

To understand this really well, I’d suggest you pick a trading system, it could be as basic as a moving average crossover system. Identify entry and exit rules and evaluate the returns you would generated for the given time period. Now for the same set of data, apply one of the position sizing technique (which we will shortly discuss) and evaluate the performance. I’m sure, you will observe a huge improvement not just in terms of P&L but also the stability of the system.

Just to throw some light into how complex this can get –

  • Assume you have a trading system – a simple moving average cross over system
  • You intend to deploy cash on this and start trading every signal that the system generates
  • There are 3 models to define equity and there are at least 3 basic models to define position sizing techniques
  • This means you can position size in 3 x 3 = 9 different ways to deploy cash for the same opportunity (signal)
  • The P&L for each will be different

However, from my experience, I would suggest you stick one method to estimate equity and maybe 1 or at the most 2 (meaningful) techniques to position size. Anything more may not be a great, in the sense, it would induce complexity, and complex does not necessarily mean better.

So you as a trader need to assess which path to follow based on your temperament. Anyway, let’s get started on the core position sizing techniques.

13.2 – Unit per fixed amount

Let’s discuss the ‘Unit per fixed amount’ model first. This is a fairly simple model. Any trader who has a slight inkling towards position sizing would have explored this model in the initial days. I like and dislike this model for the same reason – its simplicity.

The model requires you to simply state how many shares or lots (in case of futures) you will trade for a given amount. For example, assume you have Rs.200,000 in your trading account and you have the following 5 assets (futures) as your opportunity universe –

  1. Nifty
  2. SBI
  3. HDFC
  4. Tata Motors
  5. Infosys

You could simply state that you would not want to trade more than 1 lot of futures per 100,000 of any asset at any given point. Given this, assume you get a signal to buy Nifty, now since there is 2L in the account, you can choose to buy one or 2 lots.

The best part about this model is that it does not complicate the decision-making process. However, there are few problems with this model.

Consider this – the trading system that you follow generates a signal to buy Nifty Futures and at the same time the system signals you to buy Tata Motors. Since you have 2L in your account, you decide to buy 1 lot each. Do note at the point of writing this article, Nifty Futures requires a margin of about 60K and Tata Motors around 72K.

Irrespective of the margin, the rule simply states, 1 lot per 1L. This means, position sizing rule is assigning an equal weight to both the contracts, ignoring the implicit ‘riskiness’ of the asset. To give you a perspective, Nifty Futures has an annualized volatility of around 14% and Tata Motors has an annualized volatility of over 40%. So essentially, you are exposing yourself to a higher risk at the portfolio level.

This in fact, is both good and bad at the same time. Good in the sense that it does not reject a trade based on the riskiness and bad in the sense it does not really factor in risk.

There is another angle here – think about this, consider you are following a trading system to which you apply the 1 lot per 100,000 position size rule. Assume you have a 2 lac capital. Now, further assume that the system performs really well and you are bestowed with multiple winning trades. Now, for each signal, the maximum number of lots you can buy is restricted to just 2. For you to increase another lot or 2, you really need to double your capital or wait for your profits to double up you capital. So in a sense this particular position sizing technique limits the scalability of a system. The only antidote to this is to bring in a much larger account size.

For these reasons, I kind of don’t prefer the ‘unit per fixed amount’ position sizing technique. However, please don’t take my word, I’d suggest you work around and figure out your comfort level with this technique before deciding to adopt or not adopt this as your core position sizing technique.

13.3 – Percentage Margin

The percentage margin is an interesting position sizing technique. I personally think this technique is far more structured than the ‘unit per fixed amount’, technique especially for intraday traders. The percentage margin technique requires you to position size based on the margins.

Here you essentially fix a ‘X’ percentage of your capital as margin amount to any particular trade. Let’s work with an example to understand this better.

Assume you have a capital of Rs.500,000/-, with this you decide that you will not expose more than 20% as margin amount to a particular trade. This translates to a capital of Rs.100,000/- per trade.

Assume you spot an opportunity to trade Nifty Futures, you can easily take this position as the margins for this is roughly around 60K.  However, let’s say you spot an opportunity in ICICI, you will be forced to let go of this as the margin for this is close to Rs.105,000/-. This means, ICICI will be out of your trading universe until and unless you increase your capital. Obviously, one should not randomly increase the capital just to accommodate opportunities. Capital should increase as an outcome on profits accumulating in your account.

Anyway, after you initiate the position in Nifty, assume you spot an opportunity in ACC, the margin for this is 90K.

Will you take this position?

The answer to this really depends on the way you estimate equity.

If you consider the total equity model, then you will still consider your capital to be 5L, 20% of which is 1L, hence you can safely take the position in ACC.

However, if you consider the reduced total equity model, then this is how it would work (assuming 20% position sizing rule) –

Starting Capital = 5L

Margin blocked = 60K

New capital = 4.4L

Margin @ 20% = 88K

Given this, you’d fall short by (just) 2K for a 90K position, hence you would have to let go…and as you realize, equity estimation plays very crucial role here.

Lastly, assume, you spot an opportunity which requires a margin of 40K, since you have 88K, you can comfortably take up 2 lots of this position.

So on and so forth.

The percentage margin rule ensures you pay roughly the same margin to all positions. However, the volatility from each position could vary. You could end up with risky bets and therefore altering the entire risk profile of your account.

This exposure to risk is overcome by next position sizing model.

13.4 – Percentage Volatility

The percentage volatility rule accounts for volatility of the underlying asset. The volatility as per this technique is not really the ‘standard deviation’, but rather the daily expected movement in the underlying.

For example, if SBI’s OHLC is 276, 279, 274, and 278, then the volatility for the day is simply the difference between low and high i.e

279 – 274

= 5

To get a sense of the generic volatility measured this way, I can look at the difference between low and high for last ‘n’ days and take an average. However, the only problem here would be that I would be ignoring the gap up and gap down openings. For this reason, Van Tharp suggest the use of ‘Average True Range’ to measure the stock’s volatility.

The ‘Percentage Volatility’ method of position sizing requires us to define the maximum amount of volatility exposure one can assume for the given equity capital.

For example, if the equity capital is Rs.500,000/- then I could make a rule saying that I do not want to expose more than 2% of the capital to volatility.

Let’s work with an example. Here is the chart of Piramal Enterprises Limited (PEL) –

The 14-day ATR is 76. This means each share of PEL contributes to a fluctuation (volatility) of Rs.76/- to my equity capital.

Now assume I spot an opportunity to trade PEL, the question is how many share should I buy considering my equity is 5L and I’ve capped volatility exposure as not more than 2%.

2% of 5L is 10,000/-. This means I should only so many number of shares of PEL, such that the overall volatility caused by PEL is not more than 10k.

Given this, I simply have to divide 10,000 by 76 to find out the number of shares that I can buy –

10,000/76

= 131.57 or about 131 shares.

PEL is currently trading around 2700, which means to say, your overall exposure would be –

131 * 2700

=Rs.353,700/-

I’d suggest you stick to the reduced total equity model for estimating equity here. This means, the capital available for the next trade would be –

500,000 – 353,700

=146,300

Now @ 2% volatility, the capital exposure reduced to Rs.2929/-. Clearly the capital exposure to the next trade would reduce, but the exposure to volatility would remain the same.

Here is an advice (from Van Tharp, of course) if you are inclined to follow percentage volatility technique – the do estimate the total amount of volatility you want to expose your portfolio too. If the number is say 15% then on a 5L capital this works out to Rs.75,000/-.

Think about it, if every position goes against you, then you stand to lose 75k on a capital of 5L on a single day. How does that feel? If your stomach churns, then 15% portfolio volatility maybe a bit high for you.

In the next chapter, we will explore few more concepts before we proceed to understanding ‘Trading biases’.


Key takeaways from this chapter

  1. Estimating equity plays an important part in position sizing
  2. Suppose you have 3 ways to estimate equity and 4 ways to position size, then essentially you have a 4 x 3 = 12 position sizing technique
  3. Unit fixed model requires you to ascertain how many shares or lots you will trade for every ‘x’ amount of capital in your account
  4. Unit fixed model does not consider risk
  5. Percentage margin method requires you to define the maximum margin amount you will expose your capital to. You ideally should club this with total reduced equity model
  6. Percentage volatility measures volatility in term or ATR.
  7. Percentage volatility equal weights ‘volatility’ exposure to each position



84 comments

View all comments →
  1. puneet says:

    when are you posting next chapters

  2. Nishant says:

    3×3 = 9? or did you mean 3+3 = 6?
    Also, you missed discussing risking a certain percentage(I believe one of the most important styles) of your equity.
    In that, for example, you only risk a fixed percentage of your account. for example, if you decide to only risk 1% of your equity. So with Rs 500,000 account, you would only risk around Rs 5,000 per trade, regardless of the instrument you are trading.
    Best

    • Karthik Rangappa says:

      Excuse my bad math, its 9 🙂

      Will discuss this in the next chapter.

    • Anish Chandrasekaran says:

      I think the percentage volatility resembles closely to what you say. In the chapter, 2% of total capital is taken as the volatility which is the risk. How you calculate the risk may be different like Average True Range in the chapter or it may be the swing high where you place the SL.

  3. vishal says:

    Long back I had urged zerodha the “game changer” feature in the trading platform or say system features.
    I want to trade my whole life with say 2% risk per trade model.
    This 2% will be user set. Someone may set it 5% or 0.5% and so on. Someone may keep it blank.
    But for the ones who want to trade this fix % risk model, we want the platform/system auto square off a given position if it goes more than 2% of my capital — and in loss.

    If this happens Me and intraday traders like me who can’t follow a Risk Discipline due to inertia or laziness or something else. Because there will be always a stop loss set in a system based on the %amount I mention there.

    So even if I take big position size small position size the SL will be altered accordingly and eventually, I will achieve a discipline in losing or say discipline in drawdown.

    I don’t know why Zerodha Guyz have taken this request lightly.
    They have ignored it I guess.
    Had they implemented this, thousands like me would have benefitted.
    Thousands intelligent but nondisciplined traders might have actually ended in nice Profits!!

    • Karthik Rangappa says:

      Vishal, discipline in markets is an integral part. This is very similar to being disciplined in the army. There are no two ways about it. However, I will share your feedback with the team. Thanks.

  4. sameer kulkarni says:

    Hello Sir,

    thanks for this wonderful series, I actually understood mistakes I was doing while trading and always end up in not having capital for next calls.
    but does this mean that if I have a capital of 200000 and my percentage margin is say 10%, I could not take any F&O calls? or is there a way I still take F&O.

  5. Avinash Pawde says:

    what I am thinking to do now a days is suppose I have 10k capital and on this I can get margin upto 3 lakhs in intraday but I am taking 4 times margin n my stoploss is 2% so max loss will be 8% on my original capital. I can take position of 40k and be in the game using the extra margins unless n untill I hit 10 consecutive stoplosses (If this happens all the capital gets vanish) which is quite hard if my system is working with 50% to 60% winning ratio n generating average 5% to 8% positive returns monthly. Need your opinion on this and always thankful to you for the best quality of stock market content in India.

    • Karthik Rangappa says:

      8% hit on capital is quite intense. Also, your system could be 60% accurate…but there is a chance that the losing streak could occur first before you start experiencing winners. So do think about this.

View all comments →
Post a comment